崗位職責:
Participate in new product review, responsible for process feasibility of the products;
New product manufacturing concept definition for RFQ: initial process flow, layout, cycle time, equipment investment
planning;
Responsible for new product process planning, prepare process chart, PFMEA, work instruction and error proofing
definition;
Initiate the investment application for new production line or new equipment;
Work with function team and lead machine requirements/machine specification;
Work with purchase department for equipment supplier selection;
Prepare the machine build and qualification planning based on the project schedule;
Work with function team and lead machine design review;
Machine Building follow up;
Work with function team and lead machine qualification: Pre and Final qualification;
Process Lessons learnt, know-how and standards create and sustain;
Responsible for process documents preparation and training operators;
Engineering change control;
Responsible for problems analysis and continuous improvement;
Other job assignment from the company.
參與新產品的評審,負責產品的工藝可行性;
RFQ的新產品制造概念定義:初始工藝流程、布局、周期時間、設備投資計劃;
負責新產品流程規劃,編制流程圖、PFMEA、作業指導書和防錯定義;
啟動新生產線或新設備的投資申請;
與功能團隊合作,領導機器需求/機器規范;
與采購部門合作選擇設備供應商;
根據項目進度計劃,編制機器制造和鑒定計劃;
與功能團隊合作,領導機器設計審查;
機械制造跟進;
與功能團隊合作并領導機器鑒定:預賽和決賽資格;
過程經驗教訓、專門知識和標準的創建和維持;
負責工藝文件的編制和操作人員的培訓;
工程變更控制;
負責問題分析和持續改進;
公司的其他工作任務。
任職要求:
Bachelor Degree and major in Mechanical Engineering;
5+ years process experience in automotive field as manufacture engineer or related;
3+ years management experience;
Proven knowledge of implementation of automatic solution on assembly &test process;
Good knowledge of non-standard machine build and qualification;
In-depth knowledge of assembly/fabrication/manufacturing/test technology: press control, screwing control, vision
check, leakage test, laser welding, robot, IE 4.0 or related Knowledge of GD&T;
Good communication skills.
Ability to influence and motivation.
Familiar with IATF16949 requirements and PFMEA,PPAP,APQP,MSA,SPC tools;
Proficient in Office, AutoCAD office software, proficient in at least one kind of 3D design software;
Good control of progress, mind of timing.
學士學位,機械工程專業;
5年以上汽車制造工程師或相關工作經驗;
3年以上管理經驗;
在裝配和測試過程中實施自動化解決方案的豐富知識;
良好的非標準機械制造和資質知識;
深入了解裝配/制造/制造/測試技術:壓力控制、螺紋控制、視覺檢查、泄漏測試、激光焊接、機器人、IE 4.0或GD&T相關知識;
良好的溝通能力。影響和激勵的能力。
熟悉IATF16949要求和PFMEA、PPAP、APQP、MSA、SPC工具;
熟練使用Office、AutoCAD辦公軟件,精通至少一種三維設計軟件;
很好地控制進度,把握時機。