職位描述
空調工程采暖工程電子設備制造檢測/認證工業自動化
Responsibilities:
1. Independently implement product conformity design and verification for HVAC products such as air condition controller, thermostat and room unit, including design conformity requirement, verify and fix corrective solution with designer, support and review internal technical documents, apply the 3rd party product certification etc. To ensure the product conform the related CE/UL standards.
獨立完成暖通空調產品(如:空調控制器,溫控器和房間控制器)的產品合規設計和驗證工作,包括根據標準及產品特點制定產品合規設計要求,協同設計工程師制定并驗證整改方案,內部文檔支持和檢查,外部認證申請及技術溝通等,確保產品符合CE/UL等相關標準要求。
2. Build compliance test plans, set up test cases and perform, Implement product certification for CE/UL/CCC, independently accomplish technical document and report
構建產品合規測試計劃,完成測試搭建并進行測試驗證,執行產品認證活動,獨立完成技術文檔和測試報告
3. Participate EMC, safety and reliability related techinical documents review, support on troubleshooting during design
參與產品研發中EMC、安全和可靠性相關內容的技術文檔評審,對于設計過程中出現的問題給與技術支持
4. Cooperate with relevant 3rd party organization and committee, tracing latest version regulations and standards; synchronize with R&D team
與相關第三方組織和機構合作,跟蹤標準和規則的有效執行版本,在研發各部門之間同步
5. Participate in laboratory management and contribute to the standardized management and improvement of the laboratory
參與實驗室管理,并為實驗室標準化管理和改進做出貢獻
Requirements:
1. Bachelor degree or above, master degree is preferred, major in electrical and electronic engineering, industrial automation or related
本科以上學歷,碩士優先,電子工程,工業自動化或相關專業畢業
2. 5+ years related working experience in EMC design or test and product certification
5年以上EMC設計或測試及產品認證相關工作經驗
3. Adept in electronic product LVD and EMC standards, preferably 1+ year’s product certification experience in HVAC
精通電子產品的安全和電磁兼容等相關標準,有1年以上暖通空調行業產品認證經驗者優先
4. Good communication skill, carefully and strong sense of responsibility
良好的溝通能力,做事細致認真,責任心強
5. Preferably working experience under regular project management and process control
熟悉ISO17025 有實驗室管理經驗者優先
6. Proficient EMC test, in the use of EMC test equipment, in-depth understanding on EMC principle
精通EMC測試,熟練使用EMC測試儀器,并對EMC相關原理有深入了解
7. Be familiar with schematics design and PCB layout, master the related knowledge of key components on EMC and LVD side
熟悉原理圖設計以及PCB設計,掌握EMC及安規關鍵元器件相關知識
8. Rich knowledge in EMC design and correct, safety, environment, reliability(climate, mechanical, theory calculation etc.)
在EMC設計與整改,安規,環境,可靠性(環境,機械,理論計算等)技術方面有豐富的知識
9. Know well the relevant EN and UL standards, and accurate interpretation the requirement of standards, keep tracking on standards
熟悉EN和UL相關標準,并可以準確解讀標準的相關需求,持續跟蹤標準變化
10. Strong capability in English reading and writing as well as English speaking
在英語讀寫和口語方面有較強的能力
FESCO勞動合同