Education教育程度:
? Bachelor or above in Mechanical or Electrical Engineering
機械或電氣工程專業,本科或以上學歷
Working experience工作經驗:
? Three years CNC machine tools area working experience as well as knowledge in project coordination or management
三年以上CNC機床行業工作經驗 并具有項目協調工作經驗或項目管理知識
Skill and competency技能及任職能力:
? Fluent in speaking/writing English (German preferred)
良好的英語聽說讀寫(會德語最好);
? Conflict Management skills
具備沖突管理能力;
? Good communication skills and team working spirit
良好的溝通能力及團隊協作精神;
? Compromised with project on results (Time, Quality, Cost)
保證項目的時間,質量,成本等;
? Risk Management skills
具備風險管理能力;
? High skill in coordination and organization
優秀的協調組織能力;
? Strong ability in project planning, tracking and cost control.
擅長于項目規劃,追蹤及成本控制的能力;
? Profound MS-office knowledge
深厚的辦公軟件應用能力;
? Available for China and International travel, -follow the projects onsite during 30% of the calendar year;
能夠在國內及國外出差- 在年度30% 左右的時間需要在項目現場跟蹤項目。
This position requires but not limits following major job functions. Temporary duties consuming <10% of working time are not listed unless it is an essential job function.
本崗位職責包含但不限于以下列出的主要工作職責,占用工作時間小于10% 的臨時職責沒有列出,除非它是主要職責。
1. Specific staff demand/supply scheduling for the project site
項目現場具體工作人員的供需計劃;
2. Preparation for setting up the construction site
施工現場具體設施的準備;
3. Detailed scheduling and planning for the site, till FAC/last outstanding payment
為施工現場創建詳細的計劃表, 直至項目終驗收/持續至未付款項;
4. Monitoring progress and managing of the project and find solutions in case of deviations
監控并管理現場項目進度并解決發現的問題;
5. Responsibility for compliance with the goals for the construction site (time, quality, cost)
負責項目現場的目標的實施(時間、質量、成本);
6. Controlling and report of technical issues to the responsible departments and following till closing
控制和向相關部門報告技術問題并跟蹤至關閉;
7. Coordination Onsite Leader (site manager) for installation, commissioning, project acceptance tasks and procedure
和現場工長協調現場安裝,調試,項目驗收事宜及進度;
8. Contacting with the customer (Alignments, Agreements, schedule adjustment, retoolings and so on)
與客戶保持溝通, (事宜協商,計劃調整,項目改造等);
9. Open issue list (creation, tracking, maintain till closing)
開口問題清單的創建跟蹤以及維護,直至關閉;
10. Responsible for the processing of open issue list
負責開口問題清單的追蹤;
11. Resource planning for the site (forecasting)
現場資源規劃(前瞻性);
12. Handling other tasks assigned by the General Manager or the supervisor/manager
承辦總經理或上級主管/經理安排的其他事宜。
13. Keep all data and information related to the project and technology accurate, secure, and properly stored, and protected from unauthorized access, modification, or loss.
對所有涉及項目、技術等相關資料文件數據信息進行準確、安全、有效的保存,防止未經授權的訪問、修改或丟失。